In this Haunter’s How-To update, we found another special lighting pack that might prove very useful to home haunters and professionals alike. The ADJ VPar Pak is a compact, low profile LED Par Kit with two VPAR LED Pars, a soft case gig bag, and an IR wireless remote. The LED Pars feature five 4-Watt, 4-IN1 LED (red, green, blue and amber), a scissor yoke, rubber feet for uplighting and a 4-button DMX display.

What makes this particular type of light interesting is that it is designed for both uplighting and stage lighting. The power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The side outlets allow the fixture to have a flat design on the bottom so that it can sit directly on the ground or inside truss without the scissor yoke.  Pretty flexible.

We found also that the VPars offer smooth RGBA Color Mixing for nice, clean tones.  It has 40-degree beam angles, 15 built-in color macros, 5 operational modes (including DMX, Sound Active and Master/Slave), and has 8 DMX Channel modes for a variety of programming options. Users can also use the included ADJ LED RC2 IR wireless remote to change colors and functions of the LED Pars.  Another solid lighting pack that is affordable and infinitely flexible.

VPar Pak

• 6x 3-Watt RGB LEDs.
• 7-second burst of fog and light.
• Even blast of fog over 15 feet in the air.
• WIRELESS remote for maximum control and diversity in settings.

Tech Specs

• Ultra bright slim flat black Par with 5x 4-Watt, 4-IN-1 QUAD LEDs (RGBA) – casts no RGB shadows
• Smooth RGBA Color Mixing (fast or slow color change operation)
• Unique “sit-flat” design: Power & DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss
• Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers
• 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channels
• 5 Operational modes: RGBA Dimmer mode, sound active mode, static color mode, auto run mode (3 auto run modes), and DMX Control
• Digital DMX Display with 4-button menu for easy navigation
• Stand Alone or Master/Slave Configuration
• Beam Angle: 40 degrees
• 15 built-in Color Macros
• DMX-512 protocol
• Color strobe effect
• Linkable via 3-pin XLR cable
• Electronic Dimming: 0-100%
• Flicker Free
• Includes a scissor yoke to hang on truss, mount on a wall or set on the ground
• Long Life LEDs (50,000 hrs.)
• Power Draw: 21W Max
• IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 30 fixtures)
• Compatible with ADJ LED RC2 wireless infrared remote control up to 30 ft./ 10M (included in the pak)
• Multi-voltage operation: AC 100V-240V 50/60Hz
• Dimensions (LxWxH): 225 x 220 x 85mm
• Weight: 1.2 kg.
• VPAR Gig Bag inner dimensions (LxWxH): 225 x 200 x 240mm
• System Weight: 3 kg.

PACK INCLUDES

• 2x VPAR LED Pars
• 1x Soft Case Gig Bag
• 1x ADJ LED RC2 IR Wireless Remote

The ADJ VPar Pak is a compact, low profile LED Par kit with two VPAR LED Pars, a soft case gig bag and an IR wireless remote. The LED Pars feature five 4-Watt, 4-IN1 LED (red, green, blue and amber), a scissor yoke, rubber feet for uplighting and a 4-button DMX display.

The machine runs about $249.99 for the two lights. Use our hook-up at www.lightsbot.com.  If you use the coupon code, HORRORBUZZ you get 10% off your order.